Thermal grease between the CPU and the heatsink is also needed to improve heat transfer. Refer to the drive documentation to determine the correct values. Hello members, this is my first day as a member and i got a problem. Asrock K7VT2 memory module not recognized!!! ASRock assumes no responsibility for any errors or omissions that may appear in this manual.

Uploader: Shakabar
Date Added: 27 October 2006
File Size: 60.4 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 74504
Price: Free* [*Free Regsitration Required]

Position the CPU directly above the socket such that its marked corner matches the base of the socket lever.

ASRock K7VT2, Socket A, AMD Motherboard

This allows the user to set CPU host frequency manually. Yes, my password is: Although Assrock offers stepless control, it is not recommended to perform over clocking.

Installing an expansion card Step 1. The motherboard detects the jumper setup and sets the CPU host frequency automatically.

You can also restart by turning the system off and then back on. Jan to DecDay: This mode speeds up the boot-up routine by skipping memory retestings. Hello members, this is my first day as a member and i got a problem. You get what you pay for. No part of this manual may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc.


Valid values for month, day, and year are Month: Carefully insert the CPU into the socket until it fits in place. The default is 4X.


ShieldSquare reCAPTCHA Page

Use this to set addresses for the onboard serial ports or disable Serial Ports. However, this is not recommended unless you thoroughly knows the feature. The following table lists the keys found in the legend bar with their corresponding functions.

Doing so may damage the motherboard.

Asrock K7VT2 memory module not recognized!!! HELP – TechSpot Forums

Join the community hereit only takes a minute. This is necessary so that you can write or read data from the hard disk.

Use keys to move between the Month, Day and Year fields. Installation of Heatsink and CPU fan Refer to the drive documentation to determine the correct value.

People who have success with cheap brands will never bother to post in forums. Incorrect settings may cause the system to fail to recognize the installed hard disk.


Like one side of chips or two. If automatic detection is successful, BIOS Setup automatically fills in the correct values for the remaining fields on this sub-menu. With respect to the contents of this manual, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose.

Enable or Disable onboard LAN. Before you install or remove any component, ensure that the power is switched off or the power cord is detached from the power supply. If automatic detection fails, this may due to the hard disk is too old or too new.

Make sure to unplug the power cord before installing or removing the motherboard. COM 1 Parallel port: Use this to enable or disable floppy drive controller.